Date   

Re: Two EdgeNode on different machines (VMs) with All in one setup

Kanagaraj Manickam
 

Hi vikash

We support to add one plus edge node under a given edgegallery controller and your expected scenario would work and let us know your findings.

 

Thanks & Regards

Kanag

 

From: main@edgegallery.groups.io [mailto:main@edgegallery.groups.io] On Behalf Of Kumar Prasad, Vikash
Sent: Tuesday, February 15, 2022 5:05 PM
To: main@edgegallery.groups.io
Subject: [EdgeGallery] Two EdgeNode on different machines (VMs) with All in one setup

 

Dear Team,

I have below deployment scenario

 

In this scenario , on VM1 I am installing all the components of EdgeGallery using EG All in One ansible script,

But on VM2 , I will install only MEP, MECM just for EdgeNode separately.

 

Now I will configure two EdgeNode  on  VM1 for my app deployment, after doing sandbox testing and certification of apps I will store the same app on AppStore on VM1 IP: 192.168.1.100,

now in deployment stage of our APP on edge node, I will select IP: 192.168.1.101.

 

So, here I wanted to know whether this is possible or not?

 

Thanks

Vikash kumar prasad


Re: Two EdgeNode on different machines (VMs) with All in one setup

Kumar Prasad, Vikash
 

Dear Team,

Kindly reminder, if any one could suggest me how I can achieve this below task?

 

Thanks

Vikash kumar prasad

 

From: Kumar Prasad, Vikash (ADV D AA DASS T&I TPOCS)
Sent: Tuesday, February 15, 2022 5:05 PM
To: main@edgegallery.groups.io
Subject: Two EdgeNode on different machines (VMs) with All in one setup

 

Dear Team,

I have below deployment scenario

 

In this scenario , on VM1 I am installing all the components of EdgeGallery using EG All in One ansible script,

But on VM2 , I will install only MEP, MECM just for EdgeNode separately.

 

Now I will configure two EdgeNode  on  VM1 for my app deployment, after doing sandbox testing and certification of apps I will store the same app on AppStore on VM1 IP: 192.168.1.100,

now in deployment stage of our APP on edge node, I will select IP: 192.168.1.101.

 

So, here I wanted to know whether this is possible or not?

 

Thanks

Vikash kumar prasad


Two EdgeNode on different machines (VMs) with All in one setup

Kumar Prasad, Vikash
 

Dear Team,

I have below deployment scenario

 

In this scenario , on VM1 I am installing all the components of EdgeGallery using EG All in One ansible script,

But on VM2 , I will install only MEP, MECM just for EdgeNode separately.

 

Now I will configure two EdgeNode  on  VM1 for my app deployment, after doing sandbox testing and certification of apps I will store the same app on AppStore on VM1 IP: 192.168.1.100,

now in deployment stage of our APP on edge node, I will select IP: 192.168.1.101.

 

So, here I wanted to know whether this is possible or not?

 

Thanks

Vikash kumar prasad


Re: Edgegallery networking Module Calico replacement

Kumar Prasad, Vikash
 

Dear Kagan,

Thanks for your suggestion to refer to Kubernetes document, this was a great help.

I have a specific use case scenario to test with Multus CNI so I wanted to use Multus CNI like support for MacVlan, DPDK for our App.

 

Thanks

Vikash kumar prasad

 

From: main@edgegallery.groups.io <main@edgegallery.groups.io> On Behalf Of Kanagaraj Manickam via groups.io
Sent: Tuesday, February 15, 2022 11:19 AM
To: main@edgegallery.groups.io
Subject: Re: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Hi Vikash,

 

We have provided an kubernetes deployment with calico as default CNI as part of edgegallery deployment.

And I see in your case  wanted to use different CNI, which is very specific to kuberentes, may I suggest you to check with kubernetes document ?

 

Btw, could you pls share us why do you want to use different CNI in place of default one? Not sure if you are facing any issue.

 

Regards

Kanag

From: main@edgegallery.groups.io [mailto:main@edgegallery.groups.io] On Behalf Of Kumar Prasad, Vikash
Sent: Monday, February 14, 2022 2:19 PM
To: main@edgegallery.groups.io
Subject: Re: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Dear Victor,

Thanks for your reply. Multus is what I was looking for, it would be great help if you could help me for installing Multus in place of Calico.

Have you written steps for removing the Calico and installing Multus in place of Calico?

 

Could you please provide these steps, I will appreciate for your help.

 

Thanks

Vikash kumar prasad

 

From: main@edgegallery.groups.io <main@edgegallery.groups.io> On Behalf Of Gaoweitao(Victor) via groups.io
Sent: Monday, February 14, 2022 12:24 PM
To: main@edgegallery.groups.io
Subject: Re: [EdgeGallery] Edgegallery networking Module Calico replacement

 

We don’t depend on any CNI, you can use whatever you want.

 

Cause we use calico by default…

we are using Multus to support multi-cni…  

you can investigate this repo, to support the multi cni access by using domain name: https://gitee.com/edgegallery/plugins/tree/master/edgegallery-secondary-ep-controller   .

 

高维涛 Victor Gao

M:+86-15809299822

E: victor.gao@...

ICT产品与解决方案 云化网络 OSDT

Products & Solutions Cloudify Network OSDT

 

From: main@edgegallery.groups.io [mailto:main@edgegallery.groups.io] On Behalf Of Kumar Prasad, Vikash
Sent: Monday, February 14, 2022 11:14 AM
To: main@edgegallery.groups.io
Subject: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Dear Team,

I got to learn that Edgegallery uses calico networking model, if I want to use some other networking model

such as Flannel, coil etc… so is there any provision like I can remove Calico module and use other modules?

or is it something like Edgegallery is highly dependent on Calico networking module only?

 

Thanks in advance!!!

 

 

Vikash kumar prasad


Re: Edgegallery networking Module Calico replacement

Kanagaraj Manickam
 

Hi Vikash,

 

We have provided an kubernetes deployment with calico as default CNI as part of edgegallery deployment.

And I see in your case  wanted to use different CNI, which is very specific to kuberentes, may I suggest you to check with kubernetes document ?

 

Btw, could you pls share us why do you want to use different CNI in place of default one? Not sure if you are facing any issue.

 

Regards

Kanag

From: main@edgegallery.groups.io [mailto:main@edgegallery.groups.io] On Behalf Of Kumar Prasad, Vikash
Sent: Monday, February 14, 2022 2:19 PM
To: main@edgegallery.groups.io
Subject: Re: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Dear Victor,

Thanks for your reply. Multus is what I was looking for, it would be great help if you could help me for installing Multus in place of Calico.

Have you written steps for removing the Calico and installing Multus in place of Calico?

 

Could you please provide these steps, I will appreciate for your help.

 

Thanks

Vikash kumar prasad

 

From: main@edgegallery.groups.io <main@edgegallery.groups.io> On Behalf Of Gaoweitao(Victor) via groups.io
Sent: Monday, February 14, 2022 12:24 PM
To: main@edgegallery.groups.io
Subject: Re: [EdgeGallery] Edgegallery networking Module Calico replacement

 

We don’t depend on any CNI, you can use whatever you want.

 

Cause we use calico by default…

we are using Multus to support multi-cni…  

you can investigate this repo, to support the multi cni access by using domain name: https://gitee.com/edgegallery/plugins/tree/master/edgegallery-secondary-ep-controller   .

 

高维涛 Victor Gao

M:+86-15809299822

E: victor.gao@...

ICT产品与解决方案 云化网络 OSDT

Products & Solutions Cloudify Network OSDT

 

From: main@edgegallery.groups.io [mailto:main@edgegallery.groups.io] On Behalf Of Kumar Prasad, Vikash
Sent: Monday, February 14, 2022 11:14 AM
To: main@edgegallery.groups.io
Subject: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Dear Team,

I got to learn that Edgegallery uses calico networking model, if I want to use some other networking model

such as Flannel, coil etc… so is there any provision like I can remove Calico module and use other modules?

or is it something like Edgegallery is highly dependent on Calico networking module only?

 

Thanks in advance!!!

 

 

Vikash kumar prasad


Re: Edgegallery networking Module Calico replacement

Kumar Prasad, Vikash
 

Dear Victor,

I thought this mail was lost in your mailbox yesterday so this is a reminder mail.

If you have documented the steps for removing Calico and installing the Multus CNI, requesting

You to please provide the steps, it will be a great help for us.

 

Thanks

Vikash kumar prasad

 

From: main@edgegallery.groups.io <main@edgegallery.groups.io> On Behalf Of Kumar Prasad, Vikash via groups.io
Sent: Monday, February 14, 2022 2:19 PM
To: main@edgegallery.groups.io
Subject: Re: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Dear Victor,

Thanks for your reply. Multus is what I was looking for, it would be great help if you could help me for installing Multus in place of Calico.

Have you written steps for removing the Calico and installing Multus in place of Calico?

 

Could you please provide these steps, I will appreciate for your help.

 

Thanks

Vikash kumar prasad

 

From: main@edgegallery.groups.io <main@edgegallery.groups.io> On Behalf Of Gaoweitao(Victor) via groups.io
Sent: Monday, February 14, 2022 12:24 PM
To: main@edgegallery.groups.io
Subject: Re: [EdgeGallery] Edgegallery networking Module Calico replacement

 

We don’t depend on any CNI, you can use whatever you want.

 

Cause we use calico by default…

we are using Multus to support multi-cni…  

you can investigate this repo, to support the multi cni access by using domain name: https://gitee.com/edgegallery/plugins/tree/master/edgegallery-secondary-ep-controller   .

 

高维涛 Victor Gao

M:+86-15809299822

E: victor.gao@...

ICT产品与解决方案 云化网络 OSDT

Products & Solutions Cloudify Network OSDT

 

From: main@edgegallery.groups.io [mailto:main@edgegallery.groups.io] On Behalf Of Kumar Prasad, Vikash
Sent: Monday, February 14, 2022 11:14 AM
To: main@edgegallery.groups.io
Subject: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Dear Team,

I got to learn that Edgegallery uses calico networking model, if I want to use some other networking model

such as Flannel, coil etc… so is there any provision like I can remove Calico module and use other modules?

or is it something like Edgegallery is highly dependent on Calico networking module only?

 

Thanks in advance!!!

 

 

Vikash kumar prasad


Re: Edgegallery networking Module Calico replacement

Kumar Prasad, Vikash
 

Dear Victor,

Thanks for your reply. Multus is what I was looking for, it would be great help if you could help me for installing Multus in place of Calico.

Have you written steps for removing the Calico and installing Multus in place of Calico?

 

Could you please provide these steps, I will appreciate for your help.

 

Thanks

Vikash kumar prasad

 

From: main@edgegallery.groups.io <main@edgegallery.groups.io> On Behalf Of Gaoweitao(Victor) via groups.io
Sent: Monday, February 14, 2022 12:24 PM
To: main@edgegallery.groups.io
Subject: Re: [EdgeGallery] Edgegallery networking Module Calico replacement

 

We don’t depend on any CNI, you can use whatever you want.

 

Cause we use calico by default…

we are using Multus to support multi-cni…  

you can investigate this repo, to support the multi cni access by using domain name: https://gitee.com/edgegallery/plugins/tree/master/edgegallery-secondary-ep-controller   .

 

高维涛 Victor Gao

M:+86-15809299822

E: victor.gao@...

ICT产品与解决方案 云化网络 OSDT

Products & Solutions Cloudify Network OSDT

 

From: main@edgegallery.groups.io [mailto:main@edgegallery.groups.io] On Behalf Of Kumar Prasad, Vikash
Sent: Monday, February 14, 2022 11:14 AM
To: main@edgegallery.groups.io
Subject: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Dear Team,

I got to learn that Edgegallery uses calico networking model, if I want to use some other networking model

such as Flannel, coil etc… so is there any provision like I can remove Calico module and use other modules?

or is it something like Edgegallery is highly dependent on Calico networking module only?

 

Thanks in advance!!!

 

 

Vikash kumar prasad


Re: Edgegallery networking Module Calico replacement

Gaoweitao(Victor)
 

We don’t depend on any CNI, you can use whatever you want.

 

Cause we use calico by default…

we are using Multus to support multi-cni…  

you can investigate this repo, to support the multi cni access by using domain name: https://gitee.com/edgegallery/plugins/tree/master/edgegallery-secondary-ep-controller   .

 

高维涛 Victor Gao

M:+86-15809299822

E: victor.gao@...

ICT产品与解决方案 云化网络 OSDT

Products & Solutions Cloudify Network OSDT

 

From: main@edgegallery.groups.io [mailto:main@edgegallery.groups.io] On Behalf Of Kumar Prasad, Vikash
Sent: Monday, February 14, 2022 11:14 AM
To: main@edgegallery.groups.io
Subject: [EdgeGallery] Edgegallery networking Module Calico replacement

 

Dear Team,

I got to learn that Edgegallery uses calico networking model, if I want to use some other networking model

such as Flannel, coil etc… so is there any provision like I can remove Calico module and use other modules?

or is it something like Edgegallery is highly dependent on Calico networking module only?

 

Thanks in advance!!!

 

 

Vikash kumar prasad


Edgegallery networking Module Calico replacement

Kumar Prasad, Vikash
 

Dear Team,

I got to learn that Edgegallery uses calico networking model, if I want to use some other networking model

such as Flannel, coil etc… so is there any provision like I can remove Calico module and use other modules?

or is it something like Edgegallery is highly dependent on Calico networking module only?

 

Thanks in advance!!!

 

 

Vikash kumar prasad


AppStore & Developer Joint PT weekly meeting

Zhangbeiyuan
 

@All  今天开发组例会议题如下:
  1. v1.6版本迭代一开发进展对齐,请各位PTL及时更新状态
  2. 技术问题讨论
 
 
 
主题: AppStore & Developer Joint PT weekly meeting
时间: 2022-02-14 16:30-17:30 (UTC+08:00)Beijing
Internal: http://imeeting.huawei.com/meeting/joinzoom?id=0174890811&app=welink
External: https://welink.zhumu.com/j/174890811
会议ID: 0174890811
会议密码:
会议链接: http://w3.huawei.com/emeeting/mail/?redirect=http%3A%2F%2Fw3.huawei.com%2Femeeting%2F%23%2FagendaController%2F54366E553478356A703865683264664D7A3145657031697844794D4B6F764736%2Fmanage%3F&welink_open_uri=aDU6Ly83ODE1NDY1OTM3NTE0OTQvaHRtbC9pbmRleC5odG1sIy9tZWV0aW5nLzcxMDEzNDc1L2FnZW5kYT8=
 
 


【MECM】MECM Weekly Meeting Invitation #mecm

Chandler Li
 

本次例会议题:
1.Discuss Implementation of resource consumption calculation. 
2.ISO image application instantiation and image generation. 

Zoom ID: 6477069444  
Zoom password: 125991
 
Time: 16:30~17:30 Beijing Time Every Friday.
 
 
Please update the wiki if you have any interested topic.
MECM简介
MECM是边缘系统中的管控部分,主要具有以下功能:
  • 对边缘系统有全局的视图,管理所有边缘节点及其资源可用状态。
  • 管理所有边缘节点上部署的应用
  • 负责应用包的全局管理,上传,分发到边缘等。
  • 负责应用的生命周期管理,能够通过中心管理面进行应用的部署,删除等。
  • 对边缘节点和应用部署状态进行中心化管理。同时MECM能够对整体系统有个全局的视图,管理应用包的上传下载与分发,应用的部署。
  • 初始化应用时,能够根据应用的部署策略,资源要求,网络资源状态等,正确的将应用部署到合适的边缘。
  • 能够根据管理员的策略设置,对应用进行自动化的调度和迁移。


 



 



 



 



 



 


Re: Difference between IcmIP and mecHost

shashikath
 


Hi Vikash,
    mecHost IP is always edge cluster IP incase of k8s based app deployment and lcmIp should be MEPM IP(where edge components app rule manager, applcm etc... are deployed, default port is 31252) responsible for lifecycle management of applications.




Shashikanth V H
Mobile: +91-9902703318(India)
Email: shashikanth.vh@...

From:Kumar Prasad, Vikash <vikash.kumarprasad@...>
To:main <main@edgegallery.groups.io>
Date:2022-02-09 12:44:19
Subject:[EdgeGallery] Difference between IcmIP and mecHost

Dear Team,

I am installing edgegallery all in one , in development portal I have to add Host

So I have a question here that I can see I have to provide IcmIP address and mecHost Address, in my case because

I am using all in one so I am providing the same ip address for both cases but if I will install edgegallery in multinode

Cluster so which node ip address I will provide in IcmIP section and which node ip address I will provide in mecHost section.

 

It will be great help if anyone clarify this!!!

 

 

 

Thanks

Vikash kumar prasad

 


Difference between IcmIP and mecHost

Kumar Prasad, Vikash
 

Dear Team,

I am installing edgegallery all in one , in development portal I have to add Host

So I have a question here that I can see I have to provide IcmIP address and mecHost Address, in my case because

I am using all in one so I am providing the same ip address for both cases but if I will install edgegallery in multinode

Cluster so which node ip address I will provide in IcmIP section and which node ip address I will provide in mecHost section.

 

It will be great help if anyone clarify this!!!

 

 

 

Thanks

Vikash kumar prasad

 


时间调整周二早上11:00-12:00///AppStore & Developer Joint PT weekly meeting

Zhangbeiyuan
 

由于会议冲突,今天例会取消,例会时间调整到明天早上11:00-12:00,多谢
请各位PTL提前录入Gitee,并初步完成人员分配
 
------------------------------------------------------------------------------------------
@All  大家新年好,今天开发组例会的议题如下:
  1. 各组需求分析进展和开发计划对齐
 
 
主题: AppStore & Developer Joint PT weekly meeting
时间: 2022-02-08 11:00-12:00 (UTC+08:00)Beijing
Internal: http://imeeting.huawei.com/meeting/joinzoom?id=0151907906&app=welink
External: https://welink.zhumu.com/j/151907906
会议ID: 0151907906
会议密码:
会议链接: http://w3.huawei.com/emeeting/mail/?redirect=http%3A%2F%2Fw3.huawei.com%2Femeeting%2F%23%2FagendaController%2F566E63474D66374C71426A743831396D5A634E6858572F496435582B424E4D38%2Fmanage%3F&welink_open_uri=aDU6Ly83ODE1NDY1OTM3NTE0OTQvaHRtbC9pbmRleC5odG1sIy9tZWV0aW5nLzcwNzA4MTAzL2FnZW5kYT8=
 
 
 


AppStore & Developer Joint PT weekly meeting

Zhangbeiyuan
 

@All  大家新年好,今天开发组例会的议题如下:
  1. 各组需求分析进展和开发计划对齐
 
 
 
主题: AppStore & Developer Joint PT weekly meeting
时间: 2022-02-07 16:30-17:30 (UTC+08:00)Beijing
Internal: http://imeeting.huawei.com/meeting/joinzoom?id=0144982285&app=welink
External: https://welink.zhumu.com/j/144982285
会议ID: 0144982285
会议密码:
会议链接: http://w3.huawei.com/emeeting/mail/?redirect=http%3A%2F%2Fw3.huawei.com%2Femeeting%2F%23%2FagendaController%2F374C45626F57467047585A492B342B5161466957436E427845794D444E306446%2Fmanage%3F&welink_open_uri=aDU6Ly83ODE1NDY1OTM3NTE0OTQvaHRtbC9pbmRleC5odG1sIy9tZWV0aW5nLzcwNjY5NjgxL2FnZW5kYT8=
 
 


AppStore & Developer Joint PT weekly meeting

Zhangbeiyuan
 

@All  大家新年好,今天开发组例会的议题如下:
  1. 各组需求分析进展和开发计划对齐
 
 
 
主题: AppStore & Developer Joint PT weekly meeting
时间: 2022-02-07 16:30-17:30 (UTC+08:00)Beijing
Internal: http://imeeting.huawei.com/meeting/joinzoom?id=0144982285&app=welink
External: https://welink.zhumu.com/j/144982285
会议ID: 0144982285
会议密码:
会议链接: http://w3.huawei.com/emeeting/mail/?redirect=http%3A%2F%2Fw3.huawei.com%2Femeeting%2F%23%2FagendaController%2F374C45626F57467047585A492B342B5161466957436E427845794D444E306446%2Fmanage%3F&welink_open_uri=aDU6Ly83ODE1NDY1OTM3NTE0OTQvaHRtbC9pbmRleC5odG1sIy9tZWV0aW5nLzcwNjY5NjgxL2FnZW5kYT8=
 
 


AppStore & Developer Joint PT weekly meeting

Zhangbeiyuan
 

@All  大家新年好,今天开发组例会的议题如下:
  1. 各组需求分析进展和开发计划对齐
 
 
 
主题: AppStore & Developer Joint PT weekly meeting
时间: 2022-02-07 16:30-17:30 (UTC+08:00)Beijing
Internal: http://imeeting.huawei.com/meeting/joinzoom?id=0144982285&app=welink
External: https://welink.zhumu.com/j/144982285
会议ID: 0144982285
会议密码:
会议链接: http://w3.huawei.com/emeeting/mail/?redirect=http%3A%2F%2Fw3.huawei.com%2Femeeting%2F%23%2FagendaController%2F374C45626F57467047585A492B342B5161466957436E427845794D444E306446%2Fmanage%3F&welink_open_uri=aDU6Ly83ODE1NDY1OTM3NTE0OTQvaHRtbC9pbmRleC5odG1sIy9tZWV0aW5nLzcwNjY5NjgxL2FnZW5kYT8=
 
 


Re: Not able to publish my App in the AppStore

Mahdi
 

Hi

I have the same problem on EdgeGallery v1.1
Did you resolve this issue?
or anyone else can help me?

Thanks


Re: 答复: how to write upload yaml file for sandbox test

Mahdi
 

Hi

I downloaded and used the deployment yaml file you mentioned above,
but still i get failure in sandbox test,
Is there anything important that I should pay attention to?

Thanks


Re: Not able to publish my App in the AppStore

Mahdi
 

Hi
I have the same problem in publishing app, (but in edge gallery 1.1)

Do you resolve this issue?
or anyone else can help me?

Thanks

61 - 80 of 1201